Potassium ion transport across myocardial cell membrane is essential for type 2 long QT syndrome (LQT2). However, the dysfunction of potassium ion transport due to genetic mutations limits the therapeutic effect in treating LQT2. Biomimetic ion channels that selectively and efficiently transport potassium ions across the cellular membranes are promising for the treatment of LQT2. To corroborate this, we synthesized a series of foldamer-based ion channels with different side chains, and found a biomimetic ion channel of K+ (BICK) with the highest transport activity among them. The selected BICK can restore potassium ion transport and increase transmembrane potassium ion current, thus shortening phase 3 of action potential (AP) repolarization and QT interval in LQT2. Moreover, BICK does not affect heart rate and cardiac rhythm in treating LQT2 model induced by E4031 in isolated heart as well as in guinea pigs. By restoring ion transmembrane transport tactic, biomimetic ion channels, such as BICK, will show great potential in treating diseases related to ion transport blockade. STATEMENT OF SIGNIFICANCE: Type 2 long QT syndrome (LQT2) is a disease caused by K+ transport disorder, which can cause malignant arrhythmia and even death. There is currently no radical cure, so it is critical to explore ways to improve K+ transmembrane transport. In this study, we report that a small-molecule biomimetic ion channel BICK can efficiently simulate natural K+ channel proteins on the cardiomyocyte and cure E4031-induced LQT2 in guinea pig by restoring K+ transport function for the first time. This study found that the potassium transmembrane transport by BICK significantly reduced the QT interval, which provides a conceptually new strategy for the treatment of LQT2 disease.
Structural annotation of small molecules in tandem mass spectrometry has always been a central challenge in mass spectrometry analysis, especially using a miniaturized mass spectrometer for on-site testing. Here, we propose the Transformer enabled Fragment Tree (TeFT) method, which combines various types of fragmentation tree models and a deep learning Transformer module. It is aimed to generate the specific structure of molecules de novo solely from mass spectrometry spectra. The evaluation results on different open-source databases indicated that the proposed model achieved remarkable results in that the majority of molecular structures of compounds in the test can be successfully recognized. Also, the TeFT has been validated on a miniaturized mass spectrometer with low-resolution spectra for 16 flavonoid alcohols, achieving complete structure prediction for 8 substances. Finally, TeFT confirmed the structure of the compound contained in a Chinese medicine substance called the Anweiyang capsule. These results indicate that the TeFT method is suitable for annotating fragmentation peaks with clear fragmentation rules, particularly when applied to on-site mass spectrometry with lower mass resolution.
Fiber has been considered as an ideal material for virus insulation due to the readily available electrostatic adsorption. However, restricted by the electrostatic attenuation and filtration performance decline, their long-lasting applications are unable to satisfy the requirements of medical protective equipment for major medical and health emergencies such as global epidemics, which results in both a waste of resources and environmental pollution. We overcame these issues by constructing a fiber-in-tube structure, achieving the robust reusability of fibrous membranes. Core fibers within the hollow could form generators with tube walls of shell fibers to provide persistent, renewable static electricity via piezoelectricity and triboelectricity. The PM0.3 insulation efficiency achieved 98% even after 72 h of humidity and heat aging, through beating and acoustic waves, which is greatly improved compared with that of traditional nonwoven fabric (â¼10% insulation). A mask spun with our fiber also has a low breathing resistance (differential pressure <24.4 Pa/cm2). We offer an approach to enrich multifunctional fiber for developing electrifiable filters, which make the fiber-in-tube filtration membrane able to durably maintain a higher level of protective performance to reduce the replacement and provide a new train of thought for the preparation of other high-performance protective products.
Cell division is a highly regulated process essential for the accurate segregation of chromosomes. Central to this process is the assembly of a bipolar mitotic spindle, a highly dynamic microtubule (MT)-based structure responsible for chromosome movement. The nucleation and dynamics of MTs are intricately regulated by MT-binding proteins. Over the recent years, various MT-binding proteins have been reported to undergo liquid-liquid phase separation, forming either single- or multi-component condensates on MTs. Herein, we provide a comprehensive summary of the phase separation characteristics of these proteins. We underscore their critical roles in MT nucleation, spindle assembly and kinetochore-MT attachment during the cell division process. Furthermore, we discuss the current challenges and various remaining unsolved problems, highlights the ongoing research efforts aimed at a deeper understanding of the role of the phase separation process during spindle assembly and orientation. Our review aims to contribute to the collective knowledge in this area and stimulate further investigations that will enhance our comprehension of the intricate mechanisms governing cell division.
BACKGROUND AND OBJECTIVE: Glycyrrhiza glabra L. (GG) and Strychnos nux-vomica L. (NV) are traditional Chinese medicines (TCMs). Changes in the chemical composition may occur before and after the GG-NV compatibility. Ultra-performance liquid chromatography Q-exactive Orbitrap mass spectrometry (UPLC-QE-Orbitrap-MS) was applied here to study the difference in the components of the GG and NV decoctions before and after they were combined. The changes in the chemical composition of GG and NV before and after the combination were determined. METHODS: The precise molecular weight, retention time, and fragment ion peak of the different components of the decoctions before and after compatibility were obtained through UPLC-QE-Orbitrap-MS. Differential analysis methods, such as principal component analysis, were used for comparison. RESULTS: In the positive ion mode, 200 new components were added, whereas six components were lost. In the negative ion mode, 144 new compounds were identified, whereas three components were missing. CONCLUSIONS: The compatibility difference between GG and NV was studied through UPLC-QE-Orbitrap-MS. The chemical composition of GG and NV changed before and after compatibility, and a class of compounds different from GG and NV was identified in the co-decoction. This study provides an experimental basis for subsequent research into detoxification mechanisms of the GG-NV combination and offers a new analytical method for investigating the compatibility of various other TCM pairs.
The thermal desorption (TD) technique is widely employed in modern mass spectrometry to facilitate the detection of non-volatile analytes. In this study, we developed a compact TD device based on a small resistance wire and coupled it with a self-aspirating corona discharge ionization (CDI) source to conduct direct MS analysis of various liquid and solid samples. Due to its small size and low heat capacity, the temperature of the TD module can be flexibly and rapidly modulated by controlling the power sequence. Multiple heating modes, including pulse heating (PH), isothermal heating, and step heating (SH), are realized and characterized, and then applied for the detection of different real samples. In particular, the PH mode is suitable for the simultaneous detection of multiple components in samples with relatively simple matrices, while the SH mode is capable of component separation. In addition, the sensitivity and quantitative capability of the TD-CDI system for DEP solutions were tested, showing acceptable stability with a relative standard deviation of about 6.7% and a detection limit of 0.088 ng. Overall, the developed TD-CDI system provides a simple, convenient, and versatile tool for direct mass spectrometry analysis of real samples.
A simple and efficient visible-light-promoted selenylation/cyclization of o-alkynyl benzylazides/o-propargyl arylazides have been realized for the practical synthesis of seleno-substituted isoquinolines and quinolines. This strategy provides the synthesis of valuable seleno-substituted isoquinoline and quinoline derivatives via the construction of one C(sp2)-Se bond and one C-N bond within one process.
Thanks to the extensive efforts toward optimizing perovskite crystallization properties, high-quality perovskite films with near-unity photoluminescence quantum yield are successfully achieved. However, the light outcoupling efficiency of perovskite light-emitting diodes (PeLEDs) is impeded by insufficient light extraction, which poses a challenge to the further advancement of PeLEDs. Here, an anisotropic multifunctional electron transporting material, 9,10-bis(4-(2-phenyl-1H-benzo[d]imidazole-1-yl)phenyl) anthracene (BPBiPA), with a low extraordinary refractive index (ne ) and high electron mobility is developed for fabricating high-efficiency PeLEDs. The anisotropic molecular orientations of BPBiPA can result in a low ne of 1.59 along the z-axis direction. Optical simulations show that the low ne of BPBiPA can effectively mitigate the surface plasmon polariton loss and enhance the photon extraction efficiency in waveguide mode, thereby improving the light outcoupling efficiency of PeLEDs. In addition, the high electron mobility of BPBiPA can facilitate balanced carrier injection in PeLEDs. As a result, high-efficiency green PeLEDs with a record external quantum efficiency of 32.1% and a current efficiency of 111.7 cd A-1 are obtained, which provides new inspirations for the design of electron transporting materials for high-performance PeLEDs.
OBJECTIVE: Owing to the harsh environment in high-altitude areas, drivers experience significant driving stress. Compared with urban roads or expressways in low-altitude areas, the driving environment in high-altitude areas has distinct features, including mountainous environments and a higher proportion of trucks and buses. This study aims to investigate the feasibility of predicting stress levels through elements in the driving environment. METHODS: Naturalistic driving tests were conducted on an expressway in Tibet. Driving stress was assessed using heart rate variability (HRV)-based indicators and classified using K-means clustering. A DeepLabv3 model was built to conduct semantic segmentation and extract environment elements from the driving scenarios recorded through a camera next to the driver's eyes. A decision tree and 4 other ensemble learning models based on decision trees were built to predict driving stress levels using the environment elements. RESULTS: Fifty-six indicators were extracted from the driving environment. Results of the prediction models demonstrate that extreme gradient boosting has the best overall performance with the F1 score (harmonic mean of the precision and recall) and G-mean (geometric mean of sensitivity and specificity) reaching 0.855 and 0.890, respectively. Indicators based on the variation rate of trucks and buses have high feature importance and exhibit positive effects on driving stress. Indicators reflecting the proportion of mountain, road, and sky features negatively affect the expected levels of driving stress. Additionally, the mountain feature demonstrates multidimensional effects, because driving stress is positively affected by indicators of the variation rate for mountain elements. CONCLUSIONS: This study validates the prediction of driving stress using environment elements in the driver's field of view and extends its application to high-altitude expressways with distinct environmental characteristics. This method provides a real-time, less intrusive, and safer method of driving stress assessment and prediction and also enhances the understanding of the environmental determinants of driving stress. The results hold promising applications, including the development of a driving state assessment and warning module as well as the identification of high-risk road sections and implementation of control measures.
Automobile Driving , Humans , Tibet , Accidents, Traffic , Altitude , Learning
Counterfeit items are growing worldwide, affecting the global economy and human health. Anticounterfeiting tags based on a physical microstructure or chemical materials have enjoyed long-term commercial success due to their visualization and inexpensive production. However, conventional anticounterfeiting tags can be readily imitated. Herein, we have overcome this limitation by assembling colloidal nanospheres and two luminescent micromaterials into a composited photonic crystal (PhC) and achieved massive scale-up fabrication of multilevel anticounterfeiting PhC films in just several minutes of thermal rolling. The fabricated PhC film exhibits three optical states, including angle-dependent structural color (reflectivity = 66%) under white light, emits green light under 980 nm light, and emits red light under ultraviolet light. Multilevel anticounterfeiting colorful images were obtained by further use of masking templates, which integrate colors from both physically colored microstructures and chemical luminescent materials. Besides, the thermal-rolling process also shows excellent feasibility for assembling microunits with different sizes into high-quality functional PhC films.
Androstenedione (ADSD) is one of the widely detected androgens in diverse aquatic environments. However, there were few reports on the molecular mechanism of Chlorella vulgaris exposure to ADSD. In our previous research, we have investigated the genes associated with chlorophyll metabolism in Chlorella vulgaris response to ADSD. In this study, we focus on continuously up-regulated genes to explore the mechanism underlying Chlorella vulgaris resistance to ADSD toxicity. Chlorella vulgaris was exposed to ADSD with five concentration gradients. The continuously up-regulated genes were enriched by Series Test of Cluster (STC) analysis and verified by qRT-PCR. Microalgae Super Oxidase Dimutase (SOD) and Microalgae Malonic dialdehyde (MDA), two indicators of oxidative stress, were determined by ELISA after exposure to ADSD. The results showed that ADSD can stimulate the production of extracellular polymeric substances (EPS) and lead to enlargement in the cell body of Chlorella vulgaris. In addition, steroid biosynthesis and oxidoreductase activity processes were consistently up-regulated upon exposure to ADSD. In conclusion, our study highlighted the crucial role of phenotypic modification, hormone synthesis, and redox mechanisms in protecting Chlorella vulgaris cells from the harmful effects of ADSD contamination.
Chlorella vulgaris , Microalgae , Androstenedione/pharmacology , Oxidation-Reduction , Oxidative Stress/genetics
OBJECTIVE: To investigate the relationship between Human telomerase reverse transcriptase (hTERT) gene polymorphisms and the susceptibility and clinicopathological parameters of cervical cancer in women infected with high-risk human papillomavirus (HR-HPV). METHOD: A total of 380 patients with HPV-infected cervical cancer who were admitted to the Jilin province Maternal and Child Health Care Hospital (Jilin province Obstetrics Quality Control Center) from July 2019 to July 2023 were selected as case group, and 408 women with negative HPV results in the cervical cancer screening results of the physical examination in the same hospital were selected as the control group. Restriction fragment length polymorphisms polymerase chain reaction was used to detect the polymorphisms of hTERT, and its relationship with the susceptibility to high-risk HPV infection and clinicopathological parameters in patients with cervical cancer was analysed. RESULTS: Individuals carrying the GA and AA genotypes of rs2736122 were significantly associated with an increased risk of cervical cancer when compared with the GG genotype and the adjusted ORs were 0.53 (0.37-0.79) for the AA genotype and 0.73 (0.59-0.88) for the A allele genotype. Besides, GG genotype or G allele of rs2853677 presented a significant influence on cervical cancer, with ORs of 0.59 (0.41-0.86) and 10.77 (0.63-0.94), respectively, when compared with the AA genotype. And rs2853677 have statistically significant difference in tumour diameter and degree of differentiation subgroup(p < 0.05). CONCLUSION: The results of this study indicate that the hTERT gene rs2736122AA and rs2853677 GG genotypes can increase the susceptibility of high-risk HPV infection in cervical cancer patients. And rs2853677 is related to tumours above 4 cm and highly differentiated tumours. But both have nothing to do with the patient's chemotherapy sensitivity.
Papillomavirus Infections , Telomerase , Uterine Cervical Neoplasms , Child , Female , Humans , Case-Control Studies , Early Detection of Cancer , Genetic Predisposition to Disease , Genotype , Human Papillomavirus Viruses , Papillomavirus Infections/complications , Papillomavirus Infections/genetics , Papillomavirus Infections/diagnosis , Polymorphism, Genetic , Polymorphism, Single Nucleotide , Telomerase/genetics , Telomerase/metabolism , Uterine Cervical Neoplasms/pathology
In order to improve the mechanical properties and deformation characteristics of permeable concrete, glass fiber was added to this type of concrete. Based on an unconfined compressive strength test, non-contact full-field strain measurement system, and scanning electron microscopy test, the effects of aggregate particle composition, shaking time, fly ash content, fiber length, and fiber content on the strength and permeability of permeable concrete were studied. The results show that the strength and water permeability of permeable concrete are negatively correlated with an increase in shaking time. When the aggregate particle size is 5-10 mm, the permeable concrete has both good strength and permeability. Proper incorporation of fly ash improves the compactness inside the structure. The influence of different lengths of glass fiber on the strength of permeable concrete first increases and then decreases, and the permeable property decreases. With the same fiber length, the strength increases first and then decreases with an increase in the content, while the porosity and water permeability coefficient decrease. Under the test conditions, when the length of glass fiber is 6 mm, and the dosage is 2 kg/m3, the strength performance of permeable concrete is the best, and the permeability effect is good at the same time.
In this paper, permeable geopolymer concrete with high compressive strength and permeability is prepared using alkali-activated metakaolin as a slurry, and its mechanical properties are reinforced by adding steel fibers. The influencing factors of the strength, porosity and permeability coefficient of the fiber-reinforced permeable geopolymer concrete, as well as its microstructure and curing mechanism, are determined by conducting an unconfined compressive strength test, scanning electron microscopy, energy-dispersive spectroscopy and X-ray diffraction. The test results show that, under the water permeability required to meet the specification conditions, when the alkali activator modulus is 1.4 and the activation-to-solid ratio is 0.9, the effect of metakaolin activation is the most obvious, and the unconfined compressive strength of the permeable geopolymer concrete is the highest. Moreover, the paste formed via the alkali activation of metakaolin contains a large number of silica-oxygen and aluminum-oxygen bonds with a dense and crack-free structure, which enables the paste to tightly combine with the aggregates; the strength of the permeable geopolymer concrete is early strength, and its strength at a curing age of 3 days is the highest. The strength at a curing age of 3 days can reach 43.62% of the 28-day strength; the admixture of steel fiber can effectively improve the strength of the permeable concrete, and with an increase in the amount of admixture, the strength of the fiber shows a trend of increasing, and then decreasing. Under the conditions of this test, a volume of steel fiber of 0.3% enables the optimum unconfined compressive strength to be reached.
Eleutherococcus sessiliflorus (Rupr. & Maxim.) S.Y.Hu (E. sessiliflorus), a member of the Araliaceae family, is a valuable plant widely used for medicinal and dietary purposes. The tender shoots of E. sessiliflorus are commonly consumed as a staple wild vegetable. The fruits of E. sessiliflorus, known for their rich flavor, play a crucial role in the production of beverages and fruit wines. The root barks of E. sessiliflorus are renowned for their therapeutic effects, including dispelling wind and dampness, strengthening tendons and bones, promoting blood circulation, and removing stasis. To compile a comprehensive collection of information on E. sessiliflorus, extensive searches were conducted in databases such as Web of Science, PubMed, ProQuest, and CNKI. This review aims to provide a detailed exposition of E. sessiliflorus from various perspectives, including phytochemistry and pharmacological effects, to lay a solid foundation for further investigations into its potential uses. Moreover, this review aims to introduce innovative ideas for the rational utilization of E. sessiliflorus resources and the efficient development of related products. To date, a total of 314 compounds have been isolated and identified from E. sessiliflorus, encompassing terpenoids, phenylpropanoids, flavonoids, volatile oils, organic acids and their esters, nitrogenous compounds, quinones, phenolics, and carbohydrates. Among these, triterpenoids and phenylpropanoids are the primary bioactive components, with E. sessiliflorus containing unique 3,4-seco-lupane triterpenoids. These compounds have demonstrated promising properties such as anti-oxidative stress, anti-aging, antiplatelet aggregation, and antitumor effects. Additionally, they show potential in improving glucose metabolism, cardiovascular systems, and immune systems. Despite some existing basic research on E. sessiliflorus, further investigations are required to enhance our understanding of its mechanisms of action, quality assessment, and formulation studies. A more comprehensive investigation into E. sessiliflorus is warranted to delve deeper into its mechanisms of action and potentially expand its pharmaceutical resources, thus facilitating its development and utilization.
Eleutherococcus , Triterpenes , Eleutherococcus/chemistry , Plant Extracts/chemistry , Triterpenes/chemistry , Fruit/chemistry , Esters/analysis , Phytochemicals/analysis , Ethnopharmacology
The effectiveness of time- and temperature-sensitive medical products (TTSMPs) (vaccines, medicines, and biological agents) is generally evaluated by sporadically checking the storage conditions recorded in electronic thermometers. However, electronic thermometers do not achieve all-time and all-regional record, resulting in the wrong evaluation of a single TTSMP and seriously endangering public health. Herein, we report a photonic crystal sensor for evaluating the effectiveness of a single TTSMP processing storage environment. The photonic crystal sensor assembled by colloidal microspheres (WO3-x nanospheres were added into the microsphere gap) generates a fascinating composite color of angle-dependent structural color (maximum reflectivity = 45%) and durative color (WO3-x coloration). Effectiveness evaluation principle reveals that the pattern on the sensor, which was printed by the composite color, fades sensitively to time and temperature, thus having different visible periods (0-21 days affected by temperature). The visible periods of the patterns can be used to evaluate a single TTSMP's effectiveness stored under different temperatures. Furthermore, the photonic crystal sensor shows outstanding flexibility and slight adhesion, offering a promising application toward the effectiveness evaluation of TTSMPs throughout storage, transportation, and sales processes.
Nanospheres , Microspheres , Photons , Temperature
The operation and performance of electrospray ionization (ESI) is affected by the surrounding environment. In this study, a compact sub-atmospheric pressure ESI (SAP-ESI) source was designed and fabricated using the 3D printing method. This source has a simple structure and is easy to operate, as the sample solution and auxiliary gas are continuously sucked into the source through the pressure difference. The compact and enclosed ionization chamber can reduce the fluctuation of the surrounding gas flow to ensure a remarkably stable (< 3%) electrospray. Moreover, the source can offer variable SAP conditions for ESI analysis. The yield of analyte ions increases with decreasing pressure, while the production of background ions is suppressed under these conditions. In the analysis of protein samples, SAP-ESI can increase the yield and charge state of ions, which may be due to the reduction of proton transfer between charged proteins and surrounding gas. The SAP-ESI source was then used to continuously monitor the extract aqueous solution of tea leaves, and to detect the carbendazim residues on the apple surface by coupling with the liquid extraction surface analysis technique. Experimental results demonstrate that the developed SAP-ESI is a stable, practical, and versatile ionization technique.
Helicteres angustifolia L. (Helicteres angustifolia) has been commonly used in folk medicine to treat cancer; however, its mechanisms of action remain obscure. In our earlier work, we reported that aqueous extract of H. angustifolia root (AQHAR) possesses attractive anticancer properties. In the present study, we isolated five ethanol fractions from AQHAR and investigated their therapeutic efficacy in human non-small cell lung cancer (NSCLC) cells. The results showed that among the five fractions, the 40% ethanol fraction (EF40) containing multiple bioactive compounds exhibited the best selective killing effect on NSCLC cells with no obvious toxicity to normal human fibroblasts. Mechanistically, EF40 reduced the expression of nuclear factor-E2-related factor 2 (Nrf2), which is constitutively expressed at high levels in many types of cancers. As a result, Nrf2-dependent cellular defense responses are suppressed, leading to the intracellular accumulation of reactive oxygen species (ROS). Extensive biochemical analyses revealed that EF40 caused cell cycle arrest and apoptosis through activation of the ROS-mediated DNA damage response. Furthermore, treatment with EF40 compromised NSCLC cell migration, as evidenced by the downregulation of matrix metalloproteinases (MMPs) and heterogeneous nuclear ribonucleoprotein K (hnRNP-K). In vivo studies using A549 xenografts in nude mice also revealed significant suppression of tumor growth and lung metastasis in the treated group. We propose that EF40 may serve as a potential natural anti-NSCLC drug that warrants further mechanistic and clinical attention.
High strength, high toughness and high sensitivity were some of the most popular characteristics of flexible sensors. However, the mechanical properties and reproducibility of current single biomacromolecule gelatin hydrogel sensors are lower, and few hydrogel sensors have been able to provide excellent mechanical properties and flexibility at the same time so far. To address this challenge, a simple method to prepare tough polyvinyl alcohol (PVA) and gelatin hydrogel was proposed in this study. The PVA-gelatin-Fe3+ biological macromolecules hydrogel was prepared by a freeze-casting-assisted solution substitution method, which exhibited high strength (2.5 MPa), toughness (7.22 MJ m-3), and excellent temperature, humidity, stress, strain, and human motion sensing properties. This combination of mechanical properties and flexibility makes PVA-gelatin biological macromolecules hydrogel a promising material for flexible sensing. In addition, an ionic immersion strategy could also impart multiple functions to the hydrogel and be applied to various hydrogel sensor materials. Thus, this work provided an all-around solution for the preparation of advanced and robust sensors with good application prospects.
Gelatin , Polyvinyl Alcohol , Humans , Humidity , Reproducibility of Results , Temperature , Hydrogels , Ions , Electric Conductivity
MicroRNA-mediated gene regulation is important for the regulation of fatty acid metabolism and synthesis. Our previous study uncovered that the miR-145 expression is higher in the lactating mammary gland of dairy cows than in the dry-period, but the underlying molecular mechanism is incompletely understood. In this study, we have investigated the potential role of miR-145 in bovine mammary epithelial cells (BMECs). We found that the expression of miR-145 gradually increased during lactation. CRISPR/Cas9-mediated knockout (KO) of miR-145 in BMECs results in the downregulated expression of fatty acid metabolism-associated genes. Further results revealed that miR-145 KO reduced total triacylglycerol (TAG) and cholesterol (TC) accumulation and altered the composition of intracellular fatty acids (C16:0, C18:0, and C18:1). Conversely, miR-145 overexpression had the opposite effect. Bioinformatics online program predicted that miR-145 targets the 3'-UTR of the Forkhead Box O1 (FOXO1) gene. Subsequently, FOXO1 was identified as a direct target of miR-145 by qRT-PCR, Western blot analysis, and luciferase reporter assay. Furthermore, siRNA-mediated silencing of FOXO1 promoted fatty acid metabolism and TAG synthesis in BMECs. Additionally, we observed the involvement of FOXO1 in the transcriptional activity of the sterol regulatory element-binding protein 1 (SREBP1) gene promoter. Overall, our findings indicated that miR-145 relieves the inhibitory effect of FOXO1 on SREBP1 expression by targeting FOXO1 and subsequently regulating fatty acid metabolism. Thus, our results provide valuable information on the molecular mechanisms for improving milk yield and quality from the perspective of miRNA-mRNA networks.
Lactation , MicroRNAs , Female , Cattle/genetics , Animals , Mammary Glands, Animal/metabolism , Fatty Acids/metabolism , MicroRNAs/genetics , MicroRNAs/metabolism , Epithelial Cells/metabolism
